Message the support team

Chat with QuoteCloud support from the support panel, reply to a specific message, mention people, link quotes and tickets, use slash commands, pin and search messages, and bring teammates into the conversation.

Checked against the app 12 Nov 202611 min read

The support panel has a chat for talking to the QuoteCloud support team. A conversation can be just you and support, or a group with teammates from your company.

Start or open a conversation

Open a conversation

3 steps

  1. Open the support panel

    Click the message icon in the top-right corner of QuoteCloud.

  2. Go to Messages

    Choose Messages at the bottom of the panel. It lists every conversation you started and every one you were added to.

  3. Pick a conversation

    Open a conversation from the list, or choose Send us a message to start a new one.

Read the conversation

Your messages sit on the right in blue. Everyone else sits on the left in grey, with their name above their messages. People from QuoteCloud have a Support label beside their name.

  • A line in the middle of the conversation shows the time, or an event such as someone being added.

  • Under the latest message you see who has read it, for example Read by Kate and Liam.

  • A bubble with moving dots shows when someone is typing.

  • When you scroll up, a button at the bottom takes you back down. It reads Jump to latest, or counts what arrived while you were away, such as 2 new messages.

Write a message

Type in the box at the bottom and press Enter to send. Press Shift+Enter to start a new line. The line under the box reminds you that / opens commands and @ mentions a teammate.

Choose + beside the message box to:

  • Attach files, up to 25MB each. You can also paste or drag a file into the message box.

  • Send a GIF. Search for one and choose it, then send it like any message.

  • Add an Emoji.

  • Create support ticket for an issue the team needs to track.

Once the conversation has its first message, the menu also has Add a teammate.

A new conversation can start with a GIF or a file on its own, without any text.

Simple formatting works as you type: **bold**, *italic*, and a line starting with - for a list.

Use a command

Type / at the start of the message box to open the command menu. Keep typing to narrow the list, use the arrow keys or the mouse to choose a command, then press Enter. Press Esc to close the menu. A command is never sent as a message.

  • /gif opens the GIF search.

  • /add lists teammates who are not in the conversation yet. Choose one to add them. Only in a conversation that has started.

  • /leave leaves the conversation, after you confirm. Only for people who didn't start the conversation.

  • /help searches the help guides. Type a few words after it, then choose a guide to put its title and link into your message.

  • /ticket opens the support ticket form.

  • /demo books a demo with the QuoteCloud team. Only while your company is on a trial.

The menu only shows the commands you can use in that conversation. You can't use commands while editing a message.

Mention someone

Type @ in the message box, then start typing a name or email address. Use the arrow keys or the mouse to choose a person from the list, then press Enter. Tab picks the first person in the list. Their name goes into your message as a badge.

If you press Enter straight after typing @, or when no one matches, your message is sent as you typed it.

The list has two groups:

  • In this conversation is everyone already in the conversation, including the QuoteCloud support staff who have joined it.

  • Your team is active teammates from your company who are not in the conversation yet. They are marked Not in conversation.

You can only mention QuoteCloud support staff who are already in the conversation.

In a new conversation, before its first message, the list shows your active teammates. Anyone you mention joins the conversation when you send that first message, and is notified. The line under the message box says Mentioned teammates join the conversation while your message mentions someone.

In a conversation that has already started, when your message mentions a teammate who is not in the conversation, QuoteCloud asks what to do before it sends:

  • Add and send adds them to the conversation, then sends your message. They can read the whole conversation, including earlier messages.

  • Just mention sends your message without adding them. Their name shows in the message, but they are not notified and cannot open the conversation.

  • Cancel takes you back to your message.

QuoteCloud asks the same question when you edit a message and the edit mentions a teammate who is not in the conversation.

A mention of you is highlighted, so you can spot it as you read.

Type # in the message box, then start typing the title or number of a quote or a support ticket. The list shows up to eight matching quotes with their status and value, and up to eight matching tickets with their status. Choose one to add it to your message as a badge. As with @, Enter picks once you have typed something or moved through the list, and Tab picks the first match.

The list only has quotes you can open in QuoteCloud and support tickets you created.

You can also paste a link to a quote. For anyone in the conversation who can open that quote, a card under the message shows its title, status and value. Everyone else sees the link on its own.

@ and # also work in a new conversation, before its first message.

See who or what a badge is

Point at a badge in a message to open its card. On a phone or tablet, tap the badge. With a keyboard, move to the badge with Tab and press Enter. Press Esc or select outside the card to close it. Opening another badge closes the card that was open.

  • A person's card shows their name, job title and company, and whether they are in the conversation. Support staff show as QuoteCloud Support.

  • A quote's card shows its title, status, value, owner and when it was last updated. Open quote opens it in a new tab, and Copy link copies its address.

  • A ticket's card shows its title, status, priority and who it is assigned to. Open ticket opens the ticket in the support panel.

If a badge points to a quote or ticket you do not have access to, its card says so and shows nothing else.

Reply, react, edit and copy

Point at a message to show its actions. On a phone or tablet, tap the message.

  • React adds a reaction such as a heart or a thumbs up. Choose it again to remove it.

  • Reply answers that message. Your reply shows a short quote of the original above it. Select the quote to jump back to the original.

  • Edit changes the text of one of your own messages, for 10 minutes after you send it.

  • Pin keeps the message at the top of the conversation for everyone. See Pin a message below.

  • Copy text copies the message.

  • Delete removes your own message while it is still the latest one in the conversation.

In a closed conversation you can still read and copy messages, but not reply, react, edit, pin or delete.

Pin a message

Pin a message to keep it at the top of the conversation for everyone in it, such as a workaround or a reference number.

Pin a message

2 steps

  1. Show the message's actions

    Point at the message. On a phone or tablet, tap it.

  2. Choose Pin

    A strip at the top of the conversation shows who wrote the message and how it starts.

  • Select the strip to jump to the pinned message. It is outlined for a moment so you can spot it. In a very long conversation, a pinned message older than the latest 1,000 messages stays on the strip but can't be opened from it.

  • When more than one message is pinned, the strip shows a count such as 1 of 3, with the most recently pinned message first. Select the count to see the next one.

  • To unpin a message, choose the cross on the strip while it is showing, or Unpin in the message's actions.

Anyone in the conversation can pin and unpin, including QuoteCloud support. A conversation can have up to 20 pinned messages. In a closed conversation the pinned messages stay, but you can't add or remove them.

Search a conversation

Search a conversation

3 steps

  1. Open search

    Choose the magnifying glass at the top of the conversation. In a narrow panel, choose the More options menu (three dots), then Search this conversation.

  2. Type what you are looking for

    Type at least two characters. The conversation jumps to the most recent message that matches, and the matching text is highlighted.

  3. Move between matches

    A count such as 2 of 5 shows which match you are on, counted from the oldest. Use the up and down arrows to go to the previous or next match. Enter goes to the previous match and Shift+Enter to the next.

Press Esc or choose the cross to close search.

Search reads the text of messages, not the files attached to them, and covers the latest 1,000 messages in the conversation. It shows up to 50 matches. A plus sign after the count, such as 50 of 50+, means there may be more.

Add a teammate

Anyone in an open conversation can add an active teammate from their own company.

Add a teammate

2 steps

  1. Open the teammate list

    Choose + beside the message box, then Add a teammate. You can also add one from the top of the conversation: choose the person icon, or in a narrow panel the More options menu (three dots) and then Add a teammate.

  2. Choose who to add

    Search for the teammate if you need to, then select their name.

The names at the top of the conversation show everyone in it, such as Kate, Liam, Corey and you.

Leave a conversation

Choose the More options menu (three dots) at the top of the conversation, then Leave conversation, and confirm. You can also type /leave in the message box. The conversation leaves your Messages list and you stop getting its messages. Anyone still in it can add you back.

The person who started a conversation can't leave it or be removed from it. They close it instead.

Close a conversation

Only the person who started a conversation can close it. Choose the More options menu (three dots) at the top of the conversation, then Close conversation, and confirm.

Closing ends the conversation for everyone in it. It stays in each person's Messages list to read, but no one can send new messages.

Why can't I find a teammate to add?

The list only shows active members of your company who are not already in the conversation. Someone who has been invited but has not yet joined does not appear.

I mentioned a teammate. Why didn't they get a notification?

Only people in the conversation are notified. If you chose Just mention, add them with Add a teammate and they can read the whole conversation, including the message that mentions them.

Why can't I find someone from QuoteCloud support when I type @?

You can only mention support staff who are already in the conversation. Anyone on the support team can read your message, so there is no need to pick a person.

Why is a quote missing when I type #?

The list shows quotes you can open yourself, searched among the quotes your company updated most recently. Search by the quote's number to find an older one, or paste its link into the message.

Why can't I pin another message?

A conversation can have up to 20 pinned messages. Unpin one you no longer need, then pin the new one.

Why can't I edit my message?

A message can be edited for 10 minutes after you send it. After that, send a new message with the correction.

A notification took me to the dashboard and opened the support panel. Why?

When someone adds you to a conversation or mentions you, the notification opens the support panel on that conversation so you can read it straight away.

Related guides

Did this help?

Ask support
Step 1 of 10